1.Keep PC panels away from wet cement surface or any alkaline/acid base materials. 2.Keep frame clean and jointing groove flat and smooth. 3.Use neutral glass cement and right gasket. Never use gasket of PVC material. 4.Use electrical tools (tungsten carbide saw) to cut, stabilize PC panels to prevent their vibration. 5.Choose right thickness of PC panels, allow flexure radius. 6.Remain space for expanding, pay attention to inserting depth. 7.In case that marks have to be made before cutting, try to mark on protective film; if the marks must be made directly on PC panels, use wax soft marker instead of any sharp tool to mark. 8.Never tear off protective films until installation is completed. 9.Drilling and fixed: If use self -drilling screws for fixing, the hole must be pre-drilled, the aperture should be 1,5 times larger than the diameter of the screw, it is suggested to use roof hook for fixing. Do not tighten the screw strongly, otherwise stress will arise, and local crack on the sheet surface will appear
10.CLEANING & MAINTENANCE .
According to correct procedure, suitable cleanser and tools are used to clean the sheets regularly. It could keep the sheets graceful and extend the sheets' useful life:
A. Rinse sheet with lukewarm water (under 60°C)
B. Please choose cleanly and soft cloth or sponge with neutral liquid soap or detergent to clean the dirt on the surface lightly
C. Rinse sheet once again
D. The soft cloth with anhydrous alcohol could be used for cleaning, if oil, wet paint, glue spotting and other things are on the sheet.
E. Rinse with cold water and dry with a soft cloth to prevent water spotting after cleaning.
Why US? 1. Our products can fit both hot and cold areas for our technology. 2. FOB Chinese port, CIF, CFR and EXW trade terms are available for you. We will give you most competitive price. 3. Our factory is located in Baoding which is near to Beijing and Tianjin cities. It is easy for you to visit our factory. 4. Experienced in this field for 15 years development, we have set up so many direct sales stores all over China. 5. Low MOQ: it can meet your business very well 6. Good service: we treat our clients as friends. 7. 13 years experience in this field. 8. There are six stores around China, they are mainly in Foshan, Guangzhou, Taiyuan, Shanxi, Baotou, Shijiazhuang. 9. UV protection machine, we have our own UV protection machine, can one side or two sides coated. 10. Size, color can be customized